KNIFE MAKERS

NOW YOU CAN PERMANENTLY
 
MARK KNIVES, SWORDS & CUTLERY WITH YOUR NAME, DESIGNS OR TRADEMARK IN SECONDS FOR LESS THAN ONE CENT PER MARK!

Here Is The Way That Professional Knife Makers
Use To Commercially Mark Their Knives, Swords & Cutlery.

Take A Moment And Check Out The Complete Information Below That 
Explains The Marking System That Is Used Today By Most Knife Makers.

Free StencilsWould You Like To TRY Our Universal Stencils - Absolutely FREE? Just Click The Shopping Cart Link Below & Let Us Know Your Shipping Information.
It's Just That Simple!

Here Are Examples Of Electro-Chemical Marking That You Can Easily Do In
 Your Own Shop In Just Seconds!  Now All You Do Is Create Your Own Design,
 Logo, Trademark Or Brand Name And Then Put It On Your Blades For Less
 Than A Cent Per Mark.  It Is Easy, Quick, Cheap And Professional!

And You Can Do This Using The ETCH-O-MATIC And The New Mark 440 Dura-Film
Stencil Maker
(As Shown Below) To Create Your Own Trademark Stencils
 In Less Than 5 Minutes!  Simply Follow The Page On Down And See The
 Whole Process Explained In Detail.  Here Are A Few Examples To Show
You What You Can Easily Do In Your Own Shop In Just Seconds!

Scroll Down To See How Etch-O-Matic
Works And Then Check Out The Great
SPECIAL OFFERS AT THE BOTTOM!

knives

knives  knives  knives

 Create Any Design, Trademark Or Brand Name And Etch It On Your Knives In Seconds!

knives   knives   knives

You Can Make Black Marks On Stainless Steel, White Marks On Black Oxide Coatings
And Even Deep Etch Marks Down To About 0.003" That Can Be Clear Or Black.
 

sword

Now Mark Swords, Daggers, Knives, Cutlery And Anything Metal Including
Tools, Instruments, Metal Parts And Equipment With Marks You Create In
Just Seconds For Pennies.  Hundreds of Knife Makers Use The Etch-O-Matic 
 For Fun And Profit. 


 Here Is The Quick, Easy And Inexpensive Way To Mark Your Knife Blades.
First Make Your Artwork On Your Computer And Make A Stencil As Shown
Below.  When Finished It Should Look Like This One.

computer

Next Place The Stencil On Your Knife Blade And Use A Small Piece Of
Scotch Tape To Hold It In Position. 

stencil

When Ready Wet The Head Of The Etch-O-Matic With Electrolyte And
Place It On The Stencil.  After Everything Is Lined Up Correctly Just
Touch The Blade With The Ground Wire (Shown With Alligator Clip)
For A Few Seconds And Your Mark Is Complete.

knife

Here Is Your Mark.  It Is Black On Stainless Steel But You Can Also Make
Deep Etch Marks Down To About .003" And They Can Be "Clear" Or Black.

finished knife

Now You Can See Just How Easy It Is To Put Your Own Mark On
Your Knives...Or Even Personalize Them For Your Customers.


MAKE DURA-FILM STENCILS
IN MINUTES IN YOUR OWN SHOP

Here is How You Make Your Dura-Film Stencils In About 3 Minutes.
(NOTE: We Are Using Large Type So It Will Photograph Easily.)

Stencil Artwork

First Make Your Copy On Your Computer.  Here Is A Simple A B C Made Large
To Show In The Photo.  You Can Make Any Line Drawing,  Logo, Trademark
 or Simple Message You Wish.  There Is
Not Much Limit Except Photo's Are
Difficult And Very Thin Lines Are Hard To Mark.

transparency

Next Print Out Your Copy On A Transparency (Which Comes In The Kit)
And Place The Transparency Copy On A Piece Of Unexposed Dura-Film
Stencil (Which Comes In The Kit) And Finally Place A Glass Plate On Top.

stencil maker

Next Place Tray In The 440 Dura-Film Stencil Maker And Turn On Exposure
Unit For About 3 Minutes.

developer

Next Remove Stencil And Develop For 30 Seconds To A Minute.
Stencil Is Then Ready To Use To Mark Your Knives Or Anything Metal.

saw

Here We Are Marking A Saw Blade Since It Is Large Enough To Make A Good
Photo.  You Simply Lay The Stencil On The Blade, Wet The Etch-O-Matic Pad
(On Bottom) With Electrolyte, Then Place The Etch-O-Matic On The Stencil, Ground
For A Few Seconds And Then Remove And Your Blade Is Permanently Marked!


Here Are The Most Popular Etch-O-Matic Kits That Are
Combined With The New STENCIL-MAKERS For
SPECIAL COMBO OFFERS YOU MUST SEE!

With Prices Starting As Low As $79.95
There Is Nothing Available Anywhere At Prices Like This!

Click Below To See The Complete Etch-O-Matic Line
Of Makers (On Special Today) And All Our Popular Kits
Along With TODAY'S SPECIAL PRICES!

CLICK HERE FOR MAIN PAGE!


Why Not Bookmark This Page Before You Lose It?
  These Deals Won't Last Long.

Knife Makers - Mark Your Knives With the Etch-O-Matic.
P.O. Box 200 / 500 Wilcox Road
Salkum, WA 98582
 E-Mail: sales@etching-metal.com
Phone: 1.800.775.0797
Fax: 1.360.985.2996